Others
Specialty resins, accelerators, additives and reactive diluents that enhance the performance of epoxy systems across diverse industrial applications.
Showing 10 of 10 products
Amino Resin / DG Lacquer
Butylated melamine and urea resins plus DG lacquers for stoving enamels, acid-curing lacquers and metallized polyester films.
| Product Code | Type | Description | Solids Content | Viscosity (cPs @ 25°C) | Applications | Full Specs |
|---|---|---|---|---|---|---|
MF301 | Butylated MF | A butylated melamine-formaldehyde resin for high-gloss stoving enamels, compatible with alkyd, epoxy and acrylic systems. | 58 – 61 | 1,000 – 2,000 | High gloss stoving enamels with AlkydEpoxy+1 | Request |
UF8 | Butylated UF | A butylated urea-formaldehyde resin giving very fast, low-temperature acid curing for screen and wood lacquers. | 57 – 61 | 1,000 – 2,000 | Very fastlow temperature acid curing screen+1 | Request |
DG301 SPL. | Clear Liquid Resin | A clear liquid DG lacquer resin developed for metallized polyester films, giving excellent clarity and adhesion over metallized surfaces. | 58 – 62 | 150 – 250 | Metallized Polyester Films | Request |
DG401 SPL. | Clear Liquid Resin | A low-viscosity clear liquid DG lacquer resin for metallized polyester films where thinner, faster-wetting coatings are required. | 54 – 56 | 60 – 120 | Metallized Polyester Films | Request |
Accelerators
Cure accelerators for anhydride and amine epoxy systems, dosed at a few parts to raise cure speed without compromising final properties.
| Product Code | Type | Description | Dosage (parts) | Viscosity (cPs @ 25°C) | Applications | Full Specs |
|---|---|---|---|---|---|---|
AC30 | Accelerator | An accelerator for anhydride and amine epoxy systems, used at 2 – 5 parts to raise cure speed without compromising final properties. | 2 – 5 | 150 – 300 | Accelerator for AnhydridesAmine Epoxy Systems | Request |
AC150 | Accelerator | A highly efficient accelerator for anhydride and amine epoxy systems, effective at just 1 – 2 parts. Also serves as a sole curative at 6 – 10 parts (EEW = 190). | 1 – 2 | – | Accelerator for AnhydridesAmine Epoxy Systems | Request |
Additives
Plasticizers and mould release agents that tune flexibility, viscosity and demoulding in cast and pultruded epoxy parts.
| Product Code | Type | Description | Dosage (parts) | Viscosity (cPs @ 25°C) | Applications | Full Specs |
|---|---|---|---|---|---|---|
P118 | Plasticizer | A plasticizer used at 5 – 15 parts for viscosity reduction and flexibility enhancement in epoxy systems. | 5 – 15 | 50 – 125 | Viscosity ReductionFlexibility Enhancement | Request |
MR119 | Silicone | A silicone mould release agent for clean demoulding of cast and pultruded epoxy components. | – | – | Mould Release Agent | Request |
Reactive Diluents
Low-viscosity diluents that thin epoxy systems while staying chemically bound into the cured network, preserving cured performance.
| Product Code | Type | Description | EEW | Viscosity (cPs @ 25°C) | Applications | Full Specs |
|---|---|---|---|---|---|---|
RDL108 | Reactive Diluent | A reactive diluent that substantially reduces system viscosity while remaining chemically bound into the cured network, preserving mechanical and chemical performance. | 270 – 300 | 5 – 10 | Viscosity Reduction | Request |
PGE | Epoxy PGE | A phenyl glycidyl ether reactive diluent offering very low viscosity and efficient thinning of epoxy systems with minimal impact on cured properties. | 175 – 185 | 5 – 10 | Viscosity Reduction | Request |
Need the full technical data sheet?
Request the TDS to get complete specifications and handling guidelines for any product.